Finger joint for furniture production

Reading Time: 1 minute

American carpenters have constantly esteemed finger jointed pine. It was utilized as a part of the frontier time for making ordinary furniture since it was so copious and simple to work by hand. Finger joint wood’s figure is genuinely plain, so pieces were often recolored or painted to light them up. Finger-jointed wood is quite delicate and simple to ding or scratch.
It gladly bears its scars, though. All that old, humble furniture shows its history, and that is a major part of its charm. For fancier work, finger jointed pine was frequently utilized as an optional wood. Many cabinetmakers used it for cabinet sides and bottoms, bureau backs, and as a ground for veneering.
Pine’s timber appearance changes as it ages. Freshly cut, it’s a pale straw color. When exposed to air and light, it changes to a more deep yellow, like maple. But dissimilar to maple, it continues getting darker, in the end transforming a warm brown. If you plane a matured white pine load up that has been reused from an old building, you’ll see a wide assortment of hues uncover themselves with each pass. Eventually, you’ll get to the wood’s unique pale shading. However, the wood that is simply under that old surface still has a great deal to indicate.
White finger jointed pine is frequently cut from huge trees, a long way from the pith, and is typically available furnace where it is dried down to 7 to 9 percent MC, hence ready to be used in the wood supply shop.
If you are a wood supplier, it is advisable to go for pine timber to make good looking furniture which will attract many customers and earn you more profit.
Written in collaboration with Mijatovic Ltd – wood supplier

Spread the love
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  

You may also like...

Leave a Reply

Your email address will not be published.

error: Content is protected !!